NEO Premium Spray-On Hi-Temp Contact Adhesive (Drum)

This premium product is an Australian made toluene-free bio neoprene adhesive that prioritises safety for both users and the environment. With a low odour formulation, it ensures a more tolerable user experience compared to other adhesives. Additionally, it has low VOC guaranteeing uncompromised health with every application. This adhesive delivers high bonding strength, making it suitable for a variety of substrates including laminates, automotive trims, skirting, and foam rubber bonding.

Features:

• Made in Australia
• Low Odour
• Toluene-Free
• Low VOC (Indoor Air Compliant)
• High bond strengths
• Very high heat resistance (up to 160°C)
• Water resistant

Technical Information:

• Base: Neoprene
• Colour: Natural (clear)
• Pack Sizes: 15L
• Coverage Rate: 11m²/Litre
• Viscosity: 800CPS
• Open Time: 30 mins
• Flash Off Time: 5 mins
• Heat Resistance: High >160°C

Application:

• Coverage rate, evaporation time, open time and press time are dependent on type of materials to be bonded as well as workshop conditions such as temperature and humidity
• Do not use below 10°C as condensed water may form on the adhesive film and prevent bonding
• Apply adhesive evenly to both surfaces with spray gun
• Allow adhesive to evaporate until it is no longer tacky to touch
• Join surfaces before end of open time
• Apply as much pressure as possible to obtain optimum bond strength

PLEASE NOTE: Freight surcharges may apply - UN1294 (Flammable Liquid Hazchem 3).

For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).