TensorGrip® L17 Hi-Temp Laminate Spray Adhesive (Canister)

How to use the L17 Hi-Temp Laminate Spray Adhesive NSW
In stock
Only %1 left
TensorGrip® L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required. TensorGrip® L17 can also be used for bonding sheet metals, where surface preparation is very important – surface must be degreased and lightly abraded with fine abrasive or non-woven material. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For:

Decorative surface materials and all common wood substrates. FRL, FRP/GRP, Standard Laminate, Metal/Aluminum Sheeting etc


  • Fast drying with long open time
  • Fast High Tack
  • Excellent High Coverage
  • 80% of final strength achieved immediately
  • Full strength achieved in 24 hours
  • Excellent green strength and high heat resistance
  • High Temp Resistance - 120°C
  • High Solids
  • Easy Application Control
  • Class 1 Fire Rating
  • BS 6222 Bond Strength Approval
  • No ODS (Ozone Depleting Substances)
  • Portable and convenient

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
  • Total Solids: 22-28%
  • VOC Content: 161g/L
  • System Flammability: Non-Flammable Adhesive; Flammable Propellant
  • Solvent System: Methylene Chloride
  • Dry Time: 2-4 mins (depending on temp. & humidity)
  • Open Time: Long
  • Heat Resistance: High >120°C

PLEASE NOTE: Freight surcharges may apply - UN3501 (Hazardous Goods Classification).