TensorGrip® X40 Acoustic Panel Adhesive (Canister)

TensorGrip® X40 is developed in conjunction with the acoustic industry for all acoustic panel bonding applications. TensorGrip® X40 is a fast drying contact adhesive, suitable for all types of acoustic panel installation and applications including in-house and on-site bonding processes.

Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For:

Acoustic Panel Installation. Brick, Concrete, Plasterboard/Drywall, Insulation, MDF.

Advantages:

• Non-Flammable adhesive
• Low VOC
• Excellent high coverage
• 80% of final strength achieved immediately upon bonding
• Full strength achieved in 24 hours, high strength long-term bond
• Open time allows for repositionability for panel alignment prior to bonding
• Can be tinted for visability of application coverage
• Fast drying 3-4 mins with excellent initial green strength bond
• High tack – adheres aggressively to nearly any surface
• Long open time 45-60 mins
• High (105°C) temperature heat resistant
• Low odour – suitable for Building Sites
• Low atomisation limiting overspray
• Portable airless self sufficient aerosol canister spray
• System with adjustable spray patterns

Technical Data:

• 22L Portable Canister (17kg Net Weight)
• Coverage Rate: 10.0m²/Litre (220m2 spray out area/110m2 of finished bonded product)
• Total Solids: 21-27%
• VOC Content: 70.0 g/L
• System Flammability: Non-Flammable Adhesive; Flammable (2) Propellant
• Solvent System: Methylene Chloride
• Dry Time: 3-5 mins (depending on temp. & humidity)
• Open Time: Long
• Heat Resistance: High >105°C

PLEASE NOTE: Freight surcharges may apply - UN3501 (Hazardous Goods Classification).